Powder Coating! Last Updated on: 6/19/2013
I had a hard time figuring out which category to put this under, but it wound up in here. The reason it was hard to decide is because I wanted to make sure this information wasn't missed.

Like many people I belived the myth that Powder Coating would cost a small fortune. However, I found out recently that, that myth was false. In fact, I would argue that Powder Coating is MUCH MUCH cheaper then doing it youself.

A couple of weeks ago (10/23/2006) I dropped off essentially 8 parts to be powder coated at a place here in Glendale called Glendale Powder Coating.

The coin door broke down into 8 individual parts, so technically you could say it was "14 parts". However, with that said, here is essentially what I took there:

  • Coin Door (see pic)
  • Coin Door Frame
  • Q*Bert Control Panel
  • Zoo Keeper Control Panel
  • Zoo Keeper Marquee Top Bracket
  • Zoo Keeper Lower Marquee Bracket
  • Zoo Keeper Bezel Bracket
  • Williams Control Panel Hinge
  • When I took all the parts down there, I was expecting a qoute of a couple hundred dollars. I was amazed when they told me that it would only cost me $50 for everything that I brought. They said that I could probably get another coin door or control panel done for the same price.

    Basically what they said is, is that if the parts all fit on one Rack, it's $50. If you need more room, it goes to $75 and then to $100. So basically for this trip I paid about $6.25 per part. Now the best part of this, is that INCLUDED sandblasting the parts. That meant I didn't have to spend the time stripping the paint off with messy chemicals.

    A can of Paint Stripper alone is going to be more then $7, so this is a great deal.

    I think a lot of the myths may have started by people who just tried to get ONE thing powder coated like a coin door. If all I had to powder coat was a coin door it still would have cost me $50. The more you bring the cheaper it is to Powder Coat.

    Maybe I just got lucky and found a really good place that charges a great price.

    The guys a Glendale Powder Coating are great to work with. The walked me through how everything was done and showed me the different options. You can get pretty much any color you want (I think it's limited to basic colors though, nothing really odd).

    You can get glossy, flat, etc.... If you don't want smooth, they have a couple of different type of textures that they can apply.

    If you cannot find a decent Powder Coater locally, Glendale Powder Coating does take stuff in the mail. You need to call them before sending anything though. Talk to Frank and tell him you have Arcade Parts.

    The biggest issues I've found with Powder coating so far are:

    1) No Bondo'd parts. If you put bondo on the part, I don't think they can put it in the oven, or if they do, the bondo won't survive.

    2) It shows every fingerprint and dust A LOT (I'm talking about the Smooth, Glossy Black). Just like a new car.

    With those two issues in mind, I have ZERO reservations about doing it again. If fact, I am stockpiling parts to get painted. Once the parts are done, they look brand new!

    So take a look at the transformations....

    Before Powder Coating


    After Powder Coating





    ZooKeeper Coin Door After Powder Coating







    At this point, if it's metal and needs to be painted black, it's going to the Powder Coaters!

    Rate this article! 

    Date Posted: 4/23/2017 9:41 AM
    Posted By: Dale
    Comment: You have a great site and a lot of your tips I get questions all the time for , what I would like to do is post some of this on our company FB page if you do not mind and I will make sure to list you as the source. Thanks Dale

    Name:
    Email Address:
    Comment:
       
    Captcha image
    Show another codeShow another code
    Post Comment

    All Articles in this category
    Article Date 
    Title 
    4/10/2016 Adding a Handle to your Arcade Game
    4/10/2016 Replacing Power Cords
    11/3/2006 Powder Coating!
    4/27/2000 Cleaning PCBs
    4/27/2000 Examining PCBs
    4/27/2000 Fixing Control Panels
    4/27/2000 Locks with No Keys
    4/27/2000 Opening Games with No Keys
    4/27/2000 Restoring a Coin Door
    5/20/2000 Bent IC Pins (Legs)
    Page 1 of 3 (22 items)< Prev123Next >
    © Copyright 2009-2024, ClassicSoft, LLC. All rights reserved
    Powered by the ClassicSoft Web Content Framework V3