Welcome to the What's New News!

 
Here you will find all the latest news of what's happening with the Arcade Restoration Workshop! 
4/15/2003 12:00 AM
Well, good news! I fixed my Tempest video problem by adjusting the brightness down to where it should be! I also had to adjust the Y size down a bit as it stretched past the edges of the screen. So I have a fully working Tempest in excellent shape for only $30.

I would say that I had a good weekend :-)

I will be ordering a repair kit for the monitor from @BOBROBERTS@ and will rebuild the monitor. This is to ensure that it operates for as long as possible and hopefully clear up a little bit of the jitters and bowing.

I will also be cleaning it up and putting it in the game room this weekend.

More News!

Below you'll find additional news about what's happening at the Arcade Restoration Workshop!  As you scroll down the page, more news will appear.
11/14/2016 3:38:35 PM
Well, I decided to update RoboJuke with a new Motherboard, Processor and RAM. The old one was a Celeron 700 with 2MB of RAM running Windows XP. I upgraded to a Celeron N3150 (Quad Core 1.35Ghz), with 8GB of RAM running Windows 10.
After upgrading, I found out that the software I was using (Virtual Music Jukebox) wouldn't run on Windows 10. After looking for a replacement, I gave up and wrote my own Jukebox Software called "Simple JukeBox". It is avilable for FREE, you can read more about it here: http://forums.arcaderestoration.com/topics/17-Simple-JukeBox
1/21/2016 1:28:09 PM
I know, long time since my last update!  Life getting in the way of fun...
 
I added a new Links section for Arcades and Arcade Bars from around the world. 
 
If you have an Arcade or Arcade Bar that you want listed, you can submit the information here:
 
http://www.arcaderestoration.com/SubmitLink.aspx 
Will be getting ready for ZapCon 2016 (http://www.zapcon.com/), only a couple of months away! 
© Copyright 2009-2017, ClassicSoft, LLC. All rights reserved
Powered by the ClassicSoft Web Content Framework V3